EeZeClean Dry Erase Paint

EeZeClean is the first dry erase paint designed and developed to optimize dry erase ink release properties, long-term performance and application in occupied buildings. EeZeClean was designed in Precision Coatings’ lab from the start to be dry erase paint. We selected our resins, activators and other raw materials to provide not only long-term ink release properties, but also to prioritize safety during application for both the applicator and all occupants in the building during application and cure cycle. We then refined our dry erase formula to improve life-cycle performance, application working life (pot-life) and reduce odor. Finally we tested and optimized EeZeClean’s ink release properties to ensure we attained adequate cure before service for all dry erase inks even those inks that have a reputation for staining other dry erase paints.

EeZeClean Dry Erase Paint is a unique weatherable resin, a technology Precision Coatings has been working with since 1995. We chose to build EeZeClean based on the weatherable modified polysiloxane resin system due to the safety, low odor, low VOC and LEED compliance. EeZeClean has no BPA or dangerous isocyanates thus EeZeClean can be installed in a building that is occupied without having to evacuate the structure.

EeZeClean Dry Erase Paint has a low odor that we compare to the scent of a disinfectant that you would find in a health care facility. The low odor of EeZeClean will be noticeable in the immediate application area during the application and for a few hours afterward as the EeZeClean cures.

EeZeClean Dry Erase Paint is designed for the professional applicator of paints and coatings with a four hour application working life at 70 degrees Fahrenheit and is available in full quart kits and full gallon kits. Professional painters will find EeZeClean easy to use with instructions that are specific and professional and material that is packaged for professional application.

We recommend you allow EeZeClean to cure five days at 70 degrees Fahrenheit before use. Dry erase inks can be removed from EeZeClean Dry Erase Paint using a micro-fiber cloth. For long term maintenance of your EeZeClean Dry Erase Paint, every week or so clean the coated area with a clean micro-fiber cloth and Original Krud Kutter® or isopropyl alcohol to remove the dry erase ink residues

Precision Coatings manufactures performance coatings for commercial architecture, automotive, recreational marine and OEM markets. Our products are widely recognized for their performance properties, extended lifecycle, LEED and environmental compliance. We proudly manufacture our quality products in Springfield, Missouri, USA.

Precision Coatings has been manufacturing high quality fine finishes since 1959. Our roots are in automotive refinish and fleet coatings market where we continue to service a diverse group of customers. Precision’s commitment to quality, performance and VOC compliant coatings now includes the commercial architectural market, the recreational marine market and the OEM market. We have a significant color offering including metallics, pearls and solid colors in a broad range of sheens including, matte/flat, eggshell, satin, semi-gloss and gloss. Our products include high grade acrylic aliphatic polyurethanes, single component waterborne polyurethanes, modified polysiloxanes and modified corrosion resistant epoxy primers. Precision Coatings is strongly committed to developing extended life cycle coatings that not only meet, but exceed environmental standards. Precision Coatings has introduced over the last several years occupied space application friendly performance coatings including EeZeClean Dry Erase Coatings, PC5 polysiloxane epoxy, SlipShield 1000 slip resistant floor coatings, PC6 waterborne polyurethane, DTM 1600 waterborne polyurethane corrosion resistant bonding primer. . These recent introductions are all low odor, low VOC and LEED compliant.