Superior Ink Release Properties | Ceramic Like Finish | LEED Compliant

EeZeClean Dry Erase Paint turns smooth interior and exterior surfaces into writable and erasable dry erase spaces. EeZeClean Dry Erase Coating is professionally applied with a roller or spray application. EeZeClean is available in clear, white, black, metallics and custom colors so architects and designers can create dry erase walls without sacrificing design standards.

Dry Erase Walls Don't Have To Look Like A Glossy White Dry Erase Board!

EeZeClean Clear Dry Erase Coating can turn your existing acrylic latex painted walls into a writable and erasable surface without sacrificing the existing color scheme. EeZeClean Clear Dry Erase Coating is compatible with most cured and intact quality acrylic latex emulsion finishes and can be applied over the clean dry surface to make all walls in an office, conference room, retail store, health care facility or school writable and erasable without the sterile white board look. Good painting practices require that a test or a mock-up be done to test adhesion and compatibility over existing coatings and finishes.


Low Odor | Low VOC | Occupied Space Friendly Application.
EeZeClean Dry Erase Paints: Clear, White, Metallics*, Custom Colors

EeZeClean Dry Erase is a weatherable, two component silane modified epoxy with a very low disinfectant odor during application. EeZeClean should be applied to smooth surfaces such as Level 5 walls. EeZeClean can be applied over intact quality acrylic latex emulsion coatings. Good painting practices require that a test or a mock-up be done to test adhesion and compatibility over existing coatings and finishes.

EeZeClean Dry Erase System

EeZeClean Dry Erase is a weatherable, two component modified epoxy with a very low disinfectant odor during application. EeZeClean should be applied to smooth surfaces such as Level 5 walls. EeZeClean can be applied over intact quality acrylic latex emulsion coatings. Good painting practices require that a test or a mock-up be done to test adhesion and compatibility over existing coatings and finishes.

EeZeClean can be roller applied using a mohair, lint free 3/8" to 1/2" nap roller cover with a phenolic core. EeZeClean can be applied by spray using a double orifice fine finish tip such as a 312 through 413 or utilizing HVLP air spray equipment set up for a fine finish application with a conventional pressure pot, a gravity feed gun or a siphon gun. EeZeClean is intended for professional application.

*EeZeClean Dry Erase Metallics should be applied by a conventional pressure pot, a gravity feed gun, a siphon gun or HVLP and illuminated for optimum aesthetics. Metallic color samples on the website may vary with electronic reproduction. Actual color samples may be ordered from the sample gallery or by contacting Precision Coatings Customer Service.